Friedrich Packaged Terminal Air Conditioner PTAC PDH15K5S Heat Pump, 15000 BTUH, 230V 5KW 30A

COMES WITH 30AMP CORD IF THIS IS A NEW INSTALLATION A WALL SLEEVE AND EXTERIOR GRILLE WILL BE REQUIRED-PLEASE SEE FRIEDRICH PTAC PARTS AND ACCESSORY SECTION FOR PRICING

Friedrich PTAC Features

• Removes up to 3.2 pts./hr. of moisture in cool mode to improve comfort and reduce the chance of mold and mildew growth
• Quieter operation carefully engineere into the design
• Intuitive unit controls are easy to operate and operate either set point or room temperature
• Owner configurable constant fan mode
• "Instant Heat" heat pump mode quickly heats a room to the desired temperature for increased comfort
• Even heat monitoring checks room temperature and automatically adds heat boost if necessary
• Seperate thermostat settings (limiting) for cooling and heating modes allow for improved comforts
• The digital control panel will automatically run the fan to briefly sample the room temperature every nine minutes to ensure desired conditions are maintained
• Faultless sure-hold front cover system securely attaches front each time
• Room Freeze protection-initiates heat if temperature falls to 40 F in an unoccupied room
• Random compressor restart protects electrical systems from overload when power is restored
• Tamper resistant grille
• Durable, powder coat paint finish
• Stainless steel endplates on both the indoor and outdoor coil
• Indoor coil frost sensor protects the compressor to lengthen the life of the unit
• Diamonblue-Advanced corrosion protection, protects against deterioration and extends the life of the unit, especially in harsh coastal environments
• Universal heaters with heat capacities determined by the power cords
• 14 numeric cervice error codes stored in memory facilitate rapid unit diagnostics
• Tangential blower wheel creates a wide air path that distributes air throughout the room with reduced souns levels
• Two permanently lubricated fan motors for added durability and reduced sound levels indoors
• Quiet, efficient rotary compressor mounted with vibration isolators to keep the compressor running smoothly and quietlly
• Remote thermostat pop-out wiring module allows easier wiring and unit changeout without rewiring thermostat
• Condensate disposal system
• May be installed flush with the floor
• Two, easy-access washable, antimicrobial air filters
• EER's up to 12.2: COP's up to 3.4 for increased energy savings
• Set seperate heat and cool range
• Desk control ready allowing hotel owners to control units from a central location
• Energy management system compatible
• Electronic defrost control ensures more run time in efficient heat pump mode
• ​Backed by a nationwide service network, and a U.S. based Friedrich expert technical team

PLUS SHIPPING

Click Here to view SQFT and BTU chart.
Click Here to view power cord and receptacle configurations.

Write a review

SPECIFICATIONS

Voltage: 230 / 208

Capacity: 14,500 / 14,200

EER: 9.8 / 9.7

CFM (Cool / Wet Coil): 420 High, 390 Low

CFM (Fan Only): 30

Dehumidification (Pints / Hr.): 3.2

Net Weight (lbs): 121

Ship Weight (lbs): 141

REVERSE CYCLE (HEAT PUMP) PERFORMANCE

Voltage: 230 / 208

BTU / HR: 13,300 / 13,000

Amps: 5.8 / 6.2

COP: 3.0/ 3.0

ELECTRIC HEAT PERFORMANCE

Electric Heat Performance is dependent on the power cord used with the unit.  For this performance data please click here

Click Here to view SQFT and BTU chart.
Click Here to view power cord and receptacle configurations.

Consumer Brochure click here

Installation & Owners Manual click here

Power Cord Installation click here

You will need Adobe Acrobat Reader to view and print pdf files